Get clear information on roofing materials, installation, and how we work. Whether you’re wondering how long a roof should last, which system is right for your home, or how to handle a repair — our professional insights are here to guide you.
Common Questions
How do I know if I need a new roof?
Signs your shingle roof needs to be replaced:
If your asphalt shingle roof is between 15 and 25 years old, it may be nearing the end of its service life. Signs that it might be time for a replacement include granule loss, bald spots, curling or missing shingles, and visible leaks or ceiling stains. A sagging roofline may point to structural damage beneath the surface. These issues reduce the roof’s ability to protect your home and should be inspected to determine if replacement is the best solution.
When do I need to change my metal roofing system?
Metal roofs are built to last, but certain signs may indicate it’s time for a replacement. If the roof is aging and showing multiple issues, it may no longer perform as intended. Rust or corrosion can weaken the panels and cause leaks. Warping, buckling, or loose seams may point to structural movement or installation issues. Separation at seams or failed sealant can lead to water intrusion, and missing or loose fasteners can create weak points over time. If you’re seeing any of these issues, it’s time to consider a full roof evaluation.
How can I tell when my flat or low slope roof should be replaced?
Flat and low-slope roofs usually need replacement when age, wear, or recurring issues affect performance. Systems like PVC, TPO, and modified bitumen typically last 15–30 years depending on material and upkeep. Signs of trouble include ponding water, frequent leaks, or visible UV damage like cracking or brittleness. Open seams, failed flashing, and blistering or bubbling can also signal that the membrane is breaking down. If these problems keep showing up, it may be time to consider a full roof replacement.
Is my roof repairable?
Shingle roofs are likely repairable if:
Shingle roofs are often repairable when the damage is limited. If only a few shingles are missing or damaged and the surrounding area is in good shape, a spot repair may be all that’s needed. Minor leaks around flashing, vents, or penetrations can usually be sealed. Some granule loss is normal, and repairs may be possible if there are no widespread bald spots. Surface-level moss or algae can often be handled with cleaning and treatment, as long as it hasn’t caused further deterioration.
Metal roofs are likely repairable if:
Metal roofs are often repairable when issues are minor and addressed early. Loose fasteners or seams can typically be tightened or resealed to restore waterproofing. Small rust spots may be cleaned and coated before they cause lasting damage. Leaks around seams, flashing, or penetrations are often sealable.
Low slope and flat roofs are likely repairable if:
Low-slope and flat roofs are often repairable if the damage is isolated and the system is still within its service life. Small punctures or membrane tears can usually be patched without a full replacement. If ponding water is a new issue and there’s no structural damage, it may be resolved with drainage improvements. Lifted seams or flashing can often be re-sealed before they cause major leaks. As long as the roof hasn’t experienced widespread failure, repairs can help extend its lifespan.
Which material or system is best for my home?
Choosing the right roofing system depends on your needs, budget, and roof type. That’s why we offer composition shingles, standing seam metal, and low-slope options. Factors like durability, energy efficiency, and appearance all play a role. Our team is here to help you weigh the options and find the best fit for your home.
Contact us to schedule a consultation and get expert guidance.
How long does it take to install a new roof?
The time required for a roof installation depends on the roof size, material, and complexity of the project. A standard composition shingle roof typically takes 1–3 days, while metal or low-slope roofs may take longer due to additional steps in installation. Weather conditions can also impact timelines,
How long do roofing systems last?
Shingle roof systems -
Normally last between 15 to 30 years, depending on several factors. While some high-quality shingles, such as architectural or luxury shingles, can extend past 30 years. Standard 3-tab shingles often have a shorter lifespan. Climate & weather conditions, proper ventilation, correct installation, roof slope and proper drainage are all factors that factor into the longevity of a system.
Standing seam metal -
Typically lasting 40 to 50 years; however, with proper maintenance, they can last even longer. Additionally, they are one of the most durable roofing options available, often outlasting asphalt shingles and providing long-term protection for both residential and commercial buildings.
Low slope systems -
Modified Bitumen 1 Ply last approximately 15-20 years while 2-ply and PVC can last up to 30 years. Similar to the other systems, many factors have to be considered. Proper installation, Membrane thickness and layers, proper drainage and differences in environmental exposure all need to be considered.
What warranties are available?
Workmanship warranty:
We provide a 15-year workmanship warranty on steep-slope installations and a 10-year warranty on low-slope systems. Repair warranties are job-specific. If no warranty is listed on your repair proposal, the repair is not covered — usually due to poor roof conditions where replacement is recommended.
Our manufacturers offer warranties covering material defects. Contact us for more information about specific coverage.
Are estimates free?
Yes, we offer free estimates and consultations for all of our roofing projects. Our goal is to provide you with a fast and detailed no-obligation assessment of your roof’s condition and the best solutions available. This way, you can make an informed decision with no hidden costs.
Our Step-by-Step Process – What to Expect
Initial Contact:
At Art’s Roofing, we aim to make the entire process of getting a new roof simple, transparent, and stress-free. When you call, email or submit a contact request we will promptly contact you.
Consultation:
On the first call we will schedule a time to visit your property and assess your roof, do a thorough inspection, discuss your needs, and provide a detailed written estimate. Our goal is to deliver estimates as fast as possible because we know your time is valuable.
Material Selection:
Skilled in working with all major roofing materials, we’ve used our experience to narrow down the systems and manufacturers we trust most. The roofing systems we recommend are listed below, each chosen for performance, reliability, and long-term value.
We’ll help you select the right roofing system for your home or business — one that fits your style, budget, and the demands of your property.
Scheduling:
Once you approve the estimate, we’ll schedule your project at a time that works for you. While weather conditions can sometimes cause delays, we’ll keep you updated and communicate with you every step of the way to make sure the process stays clear and on track.
Installation:
During installation, our crew works efficiently while taking care to protect your property. From tear-off to final installation, each step is handled with care and professionalism. Project timelines can vary depending on a few factors, but we’ll keep you informed and answer any questions along the way.
To help the process go smoothly, please refer to the homeowner preparation checklist below.
Cleanup and Final Walkthrough:
After installation, we clean up the site thoroughly and walk you through the finished project to make sure you’re satisfied with the results. Once everything is complete, we schedule the final inspection with your city or county permitting office as required.
Warranty and Support:
If you ever have an issue with your roof, contact us directly so we can take care of it the right way. Art’s Roofing offers a 15-year workmanship warranty on steep-slope roofing systems and a 10-year workmanship warranty on low-slope systems.
We’re here to help with any follow-up questions and can guide you through the process of setting up your manufacturer warranties. Keep in mind that any changes to the roof like repairs, new gutters, or satellite installations — can void your warranty. When in doubt, give us a call.
Home owner preparation checklist
Terms and conditions
Roofing Materials & Systems – Compare Your Options
Why a malarkey shingle system
Highlander Architectural details and color chart
Windsor Designer details and color chart
Why Choose a Pabco Shingle system
Pabco Premier Details and Color Chart
Pabco signature Cut Designer Details and Color chart
Standing Seam Metal Roof System
Standing seam metal roofs are one of the most durable and long-lasting roofing options available. While asphalt shingles usually last 20–30 years, a properly installed metal roof can last over 50 years. These systems resist harsh weather, including high winds, heavy rain, hail, and fire. With concealed fasteners, they reduce the risk of leaks and need of maintenance.
Metal roofing is also energy-efficient and environmentally friendly. It reflects sunlight, helping reduce cooling costs. Many systems are made from recycled materials and can be fully recycled at the end of their life. While the upfront cost is higher than asphalt shingles, the long-term savings in energy, maintenance, and longevity of the system make standing seam metal roofing a smart investment for homeowners looking for a low-maintenance, long-lasting solution.
Color Options
Low Slope Systems
Modified Bitumen
At Art’s Roofing, we install CertainTeed Flintlastic® modified bitumen systems to provide a reliable, long-lasting solution for low-slope and flat roof areas. These systems offer strong waterproofing, excellent weather resistance, and work well in both residential and commercial settings. Modified bitumen integrates seamlessly with asphalt shingle roofs, making it a smart choice for homes with mixed roof types or transitions between pitches.
Modified bitumen (Mod Bit) is an asphalt-based roofing material enhanced with rubber or plastic polymers for improved durability, flexibility, and resistance to harsh weather conditions. This system is commonly used for flat and low-slope roofs and is designed to handle extreme temperatures, foot traffic, and standing water better than traditional rolled roofing or built-up systems.
1-Ply vs. 2-Ply Modified Bitumen Systems
1-Ply System (Single Layer)
The Flintlastic 1-Ply torch-down system by CertainTeed is a cost-effective solution for low-slope and flat roof areas. This single-layer membrane offers reliable waterproofing, solid durability, and UV resistance. It’s a smart choice for areas that don’t require multi-layer reinforcement but still need dependable protection. With proper installation and care, this system typically lasts 15 to 20 years, depending on exposure to sun, rain, and other elements.
2- Ply System (Double Layer)
The Flintlastic 2-Ply system is a stronger, more durable option for low-slope and flat roof areas. With two layers of waterproofing, it offers added protection against leaks, foot traffic, and extreme weather. It’s ideal for homeowners looking to match the lifespan of an asphalt shingle system. With proper care, a 2-ply installation can last up to 30 years depending on environmental exposure.
CertainTeed Flintlastic Color Options
PVC
Duro-Last PVC Roofing
Duro-Last is a high-performance, prefabricated PVC roofing system designed for flat and low-slope roofs. It’s known for its exceptional durability, energy efficiency, and watertight performance. Heat welded seams make it a reliable option for both residential and commercial applications. Duro-Last is a long-lasting solution built to handle harsh weather and daily exposure.
What is Duro-Last PVC made of?
Duro-Last is made from a tough, single-ply PVC material, a type of durable plastic designed to handle harsh weather and long-term exposure. It’s reinforced with a strong fabric layer inside, giving it added strength and flexibility. The top layer is reflective and available in white, gray, or tan.
Why is Duro-Last PVC the best choice?
Duro-Last is a reliable option for flat and low-slope residential or commercial roofs. Its design helps reduce common leak points, and the reflective surface can improve energy efficiency. The system installs quickly and holds up well against weather, UV rays, and daily wear. It’s a low-maintenance solution built to last.
Duro-Last PVC Color Options
Contact us if you have any questions or need an estimate. We are here to help!